Adjusting The Monitor Settings; Using The On-Screen Display Menu; Osd Menu Selections - HP LP2275w User Manual

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display
Assistant utility.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1. If the monitor is not already on, press the
2. To access the OSD Menu, press the
3. To navigate through the OSD Menu, press the
up, or the
4. To select an item from the OSD Menu, use the
then press the
5. Adjust the item using the
6. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting,
then select Exit from the Main Menu.
NOTE: If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments will
be discarded and the settings will revert to previous settings and exit the menu.

OSD Menu Selections

The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.
After changing an OSD menu item, and if the menu screen has these options, you may choose to:
●
Cancel—to return to the previous menu level.
●
Save and Return—to save all changes and return to the OSD Main Menu screen. This Save and
Return option is only active if you change a menu item.
●
Reset—to change back to the previous setting.
– (Minus) button to scroll in reverse.
Menu button to select that function.
+ or – buttons on the front panel to adjust the scale.
Power button to turn on the monitor.
Menu button on the monitor's front panel.
+ (Plus) button on the monitor's front panel to scroll
+ or – buttons to scroll to and highlight your selection,
Adjusting the Monitor Settings 25