Bluetooth Operation - Jensen CMR322 Installation & Owner's Manual

4
5
Preparation
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
Phone Keypad
Current Mode Indicator
Bluetooth Phone
Bluetooth Music
Available Devices
Talk
End Call

Bluetooth Operation

1
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from your
Bluetooth device. Refer to the owner's manual for your device for
more details. The device name is "CMR322".
is "0000". The unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to be done more
than once.
Most Bluetooth devices support the auto-connect feature and will
connect automatically if the device is in range when the unit is
powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from the Main Menu or
press the phone icon from any operational mode.
Press to return to the Main Menu screen.
1
Use the phone keypad to dial the desired phone number. Alternately,
2
numbers can be dialed directly from the phone.
Displays current mode of operation.
3
Press to access Bluetooth phone.
4
Press to access Bluetooth music.
5
Press to view a list of available devices.
6
Press to connect a call.
7
Press to end a call.
8
2
CMR322 OPERATION
3
6
7
8
The Bluetooth passcode
12