Bluetooth Operation - Jensen CMR682 Installation & Owner's Manual

1
2
3
4
Preparation
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
1
Phone Keypad
2
Exit Bluetooth
3
Keypad
4
Contacts
5
Backspace
6
Recent Call List
7

Bluetooth Operation

5
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from your
Bluetooth device. Refer to the owner's manual for your device
for more details. The device name is "JENSENBT".
passcode is "0000".
pairing is performed. On certain phones, pairing may need to be done
more than once.
Most Bluetooth devices support the auto-connect feature and will
connect automatically if the device is in range when the unit is
powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from the Main Menu or
press the phone icon from any operational mode.
Press to return to the Main Menu screen.
Use the phone keypad to dial the desired phone number. Alternately,
numbers can be dialed directly from the phone.
Press to exit Bluetooth and return to the previous mode of operation.
Press to display the keypad and dial a number.
Press to display contacts. Use the up/down arrows to scroll, and press
the contact name to dial.
Press to backspace when using the keypad.
Press to view a list of recent calls. Press any number to dial.
CMR682
6 7
The unit can be in any mode of operation when
OPERATION
The Bluetooth
14