Bluetooth Operation - Jensen CMM710 Installation & Owner's Manual

EN
Tips
CMM710 OPERATION

Bluetooth Operation

5
5V 1A
USB CHARGE
6
7
Preparation
Pairing a New
Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
Mode Indicator
Keypad
Backspace
Keypad Display
Music Display
Contact Display
14
1 2
Nyne ADS15
Before using a Bluetooth device, it must be paired
and connected. Make sure that Bluetooth is activated
on your device before you begin the pairing process.
The unit broadcasts the pairing signal constantly
when no devices are currently connected. Complete
the pairing sequence from your Bluetooth device.
Refer to the owner's manual for your device for more
details. The device name is "JENSEN CMM710". The
unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to
be done more than once.
Most Bluetooth devices support the auto-connect
feature and will connect automatically if the device is
in range when the unit is powered-on. If your device
was previously paired but does not connect, enter
the Bluetooth setup menu and turn Auto Connect on.
To access the phone, select Bluetooth Phone from
the Main Menu or from any operational mode.
Press to return to Main Menu screen.
1
Displays the current mode of operation.
2
Use the keypad to dial a phone number.
3
Press to backspace when using the keypad.
4
Press to display the keypad.
5
Press to display Bluetooth music.
6
Press to display Contact list, then press desired
7
contact to initiate a call.
3 4