Setting Oven Lockout Feature; Options; Changing Hour Mode On Clock (12Hr., 24Hr.); Setting Temperature Unit (F Or C) - LG LRE30453ST Owner's Manual & Cooking Manual

SETTING OVEN LOCKOUT
FEATURE
The START pad controls the Oven Lockout feature. The
Oven Lockout feature automatically locks the oven door,
prevents the Warming Drawer and most oven controls from
being turned ON. It does not disable the clock, timer or the
interior oven light.
To activate the Oven Lockout feature:
1. Press and hold START for
3 seconds.
2. 2 beeps will sound, DOOR
LOCKED will flash in the display.
Once the oven door is locked the
DOOR LOCKED indicator will stop
flashing and remain on along with
the lock icon(
To reactivate normal oven operation:
1. Press and hold START for 3
seconds. A beep will sound
2 times. The DOOR LOCKED will
continue to flash until the oven
door has completely unlocked and
the lock icon(
2. The oven is again fully operational.
CHANGING HOUR MODE ON
C L O C K(12hr, 24hr)
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.
Changing between 12 or 24 hour time of day
1. Press and hold COOK & WARM
pad for 3seconds. OPt will be
displayed.
2. Press 1. The display will show CLO
12H.
3. Press 1 to switch between the
12H and 24H.
4. Press START to accept the desired
change.
OPERATION (OPTIONS)
) light.
) light will clear.
- 16 -
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
COOK & WARM pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
1. Press COOK & WARM for 3
seconds.
2. Press 2. The display will show
Unit F.
3. Press 2 to switch between the F
and C.
4. Press START to accept the
desired change.

SETTING BEEPER VOLUME

The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
To set beeper volume
1. Press COOK & WARM for 3
seconds.
2. Press 3. The display will show
BEEP Hi.
3. Press 3 to switch beeper volume
( Hi, Lo, and OFF ).
4. Press START to accept the
desired change.