Table of Contents
Advertisement
Section 5: Coniguration
The System settings section allows you to restart the system or reset the device to its factory default settings. Restoring the
unit to factory settings will erase all settings, including any rules that you have created.
Restart:
If the NVR is malfunctioning or crashes unexpectedly, click the Restart
button. Restarting the NVR will take about 90 seconds.
Default:
This will reset all conigurations to factory default.
Save
All the conigurations can be saved as a ile to the speciied location. Click
Coniguration:
the Save button to save the ile.
Load
User can restore the coniguration from a ile after resetting to factory default.
Coniguration:
Click the Browse button to select the coniguration ile and restore it by
clicking the Load button.
Idle Time:
When an adminstrator enters any of the Setup pages (except the Live Video
and Playback page) the NVR will count the idle time where the user is inactive.
After the idle time exceeds a speciied period the NVR will force the user
to logout and request login authentication again for security. Change the
period of idle time here.
Buzzer:
This option will toggle the device buzzer on or of. (See "LED and Buzzer
Overview" on page 61)
Enable Auto
This option will enable the device to automatically add veriied cameras
Plugin:
found on the network.
D-Link DNR-202L User Manual
System
54
Advertisement
Table of Contents
