Table of Contents
Advertisement
2.1.4
NIC Partition Configuration Menu
Comprehensive Configuration Management v7.10.31
Copyright (C) 2000-2014 Broadcom Corporation
All rights reserved.
[←|→][Enter][Space]:Scroll Value; [↑|↓]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
Flow Control [Tx/Rx Flow Control]
Configuration options: [Tx/Rx Flow Control] [Disabled] [Auto] [Tx: Send Pause on Rx
Overflow] [Rx: Throttle Tx on Pause Received]
PF#0/2/4/6
Press an item to configure its NIC Partition parameters.
PF#0 L2=00:10:1802:14:3C(P) Eth
Reset Configuration to Default
Select this item and press <Enter> to reset NIC Partition of all ports on this card to the
factory default settings.
2-8
NIC Partition Configuration
Flow Control :
Tx/Rx Flow Control
PF#0 L2=00:E0:18:09:05:2C(P) Eth
PF#2 L2=00:E0:18:09:05:30(P) Eth
PF#4 L2=00:E0:18:09:05:34(P) Eth
PF#6 L2=00:E0:18:09:05:38(P) Eth
Reset Configuration to Default
Configure Physical Port Flow Control
Chapter 2: Boot Agent Configuration
Advertisement
Table of Contents
