Packing and Unpacking
WARNING: Compaq recommends that two people take the monitor
from or place the monitor into the box. This helps ensure that the
monitor is not dropped. Dropping the monitor may result in personal
injury or injury to the equipment.
Care and Maintenance
To enhance the performance and extend the life of your monitor, use the
I Do not open your monitor cabinet or attempt to service this product
yourself. If your monitor is not operating properly, or has been
dropped or damaged, first unplug your monitor from the power
outlet, then contact your Compaq authorized dealer, reseller, or
I Adjust only those controls that are discussed in the operating
I Place your monitor at least 3 inches (76 mm) away from walls or
I Use only a power source and connection appropriate for this
monitor, as indicated on the label/back plate of the monitor.
I Be sure the total ampere rating of the products connected to the
outlet does not exceed the current rating of the electrical outlet, and
the total ampere rating of the products connected to the cord does
not exceed the rating of the cord. Look on the power label to
determine the ampere rating (AMPS or A) for each device.
I Install your monitor near an outlet that you can easily reach.
Disconnect the monitor by grasping the plug firmly and pulling it
from the outlet. Never disconnect the monitor by pulling the cord.
I Turn your monitor off when not in use. You can substantially
increase the life of your monitor by using a screen saver program.