M.2 Solid-State Drive And Heat Sink - Lenovo V55t Gen 2 Hardware Maintenance Manual

Removal steps
Note: If the card is held in place by a retaining latch, press the latch as shown to disengage the latch. Then,
gently remove the card from the slot.

M.2 solid-state drive and heat sink

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
The heat sink might be very hot. Before you open the computer cover, turn off the computer and wait several
minutes until the computer is cool.
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the M.2 solid-state drive. Otherwise, the M.2 solid-state drive might get
damaged.
64
Lenovo V55t Gen 2 Hardware Maintenance Manual