Drive Bay Assembly - Lenovo V55t Gen 2 Hardware Maintenance Manual

For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 56.
2. Remove the front bezel. See "Front bezel" on page 57.
3. Disconnect the signal cable and the power cable from the optical drive.
Removal steps

Drive bay assembly

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 56.
2. Remove the front bezel. See "Front bezel" on page 57.
58
Lenovo V55t Gen 2 Hardware Maintenance Manual