M.2 Solid-State Drive Bracket - Lenovo V55t Gen 2 Hardware Maintenance Manual

Note: Remove the film that covers the thermal pad (if any) when installing the M.2 solid-state drive and
the heat sink.

M.2 solid-state drive bracket

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 56.
2. Remove the front bezel. See "Front bezel" on page 57.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 58.
4. Remove the drive bay assembly. See "M.2 solid-state drive and heat sink" on page 64.
Removal steps
.
Chapter 6 Hardware removal and installation
67