Cleaning The Particle Sensor; Cleaning The Surface Of The Filter - Philips AC3059 User Manual

Cleaning the particle sensor

Clean the particle sensor every 2 months for optimal functioning of the appliance�
Note:
• If the air purifier is used in a dusty environment, it may need to be cleaned more often�
• If the humidity level in the room is very high, condensation may develop on the particle
sensor and the air quality light may indicate a more poor air quality even though the air
quality is actually good� If this occurs, clean the particle sensor�
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig
3
Clean the particle sensor with a damp cotton swab (fig
4
Dry all parts thoroughly with a dry cotton swab�
5
Reattach the back cover (fig

Cleaning the surface of the filter

Filter alert light status
The filter cleaning alert
screen (fig )�
u
1
Switch off the air purifier and unplug from the power socket�
2
Pull the back cover and remove it from the appliance (fig
3
Pull the filter from the appliance (fig
4
Clean the surface of the filter with a vacuum cleaner (fig
5
Put the filter back into the appliance (fig
6
Reattach the back cover� (fig
7
Put the plug of the air purifier in the power socket�
8
Touch the button to switch on the appliance�
9
Touch and hold the filter status check/reset button
cleaning time�
10
Wash your hands thoroughly after cleaning the filter�
)�
g
Action
Clean the surface of the filter with a
displays on the
vacuum cleaner�
)�
v
)�
f
)
g
)�
c
)�
t
)�
c
)�
w
for 3 seconds to reset the filter
EN
11