Replacing A Tail/Brake Light Bulb - Yamaha FZS1000T Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
6
Do not use a headlight bulb of a
wattage higher than specified.
1. Do not touch the glass part of the bulb.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the panel.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-32
Replacing a tail/brake light
bulb
1. Remove the seat. (See page
3-10.)
2. Remove the tail/brake light bulb
cover.
1. Tail/brake light bulb cover
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
EAU24160