Chain Tension Inspection; Chain Lubrication - Ducati 996R Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Chain tension inspection (fig. 34)
Slowly turn the rear wheel to find chain max. tensioning.
With the motorcycle on the side stand, use your finger to
push the chain upwards at swingarm center line. The
chain lower section should have a play of 25 mm.
If this is not the case, contact a Ducati Dealer or
Authorized Workshop for proper chain tensioning.
Warning
Correct tightening of the eccentric hub clamping
screws is essential to rider's safety.
Important
Improper chain tension will lead to early wear of
transmission parts.

Chain lubrication

The chain fitted on your motorcycle has OR seals that
keep dirt out of and lubricant inside the sliding parts. The
seals might be irreparably damaged if the chain is
cleaned using any solvent other than those specific for
OR chains or washed using steam or water jets. After
cleaning, blow the chain dry or dry it using absorbent
material and apply SHELL Advance Chain or Advance
Teflon Chain on each link.
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.
Tensione catena (sul cavalletto laterale)
Chain tension adjustment (on side stand)
E
fig. 34
45

Advertisement

Table of Contents
loading

Table of Contents