Clean Your Humidifier; Clean The Body Of The Humidifier; Clean The Water Tank; Clean The Humidification Filter - Philips HU4803 User Manual

5 Clean your
humidifier
Note
•
Always unplug the humidifier before you clean it.
•
When pouring water from the water tank, make
sure to pour water from the opposite side of
the drain hole and air inlets.
•
Never use abrasive, aggressive, or flammable
cleaning agents such as bleach or alcohol to
clean any part of the humidifier.
Clean the body of the
humidifier
Regularly clean the inside and outside of the
humidifier to prevent dust from collecting.
1
Wipe away dust with a soft dry cloth from
the body of the humidifier.
2
Clean the air inlet and the air outlet with a
soft dry cloth.

Clean the water tank

Clean the water tank every week to keep it
hygienic.
1
Take out the humidification filter and the
filter support.
2
Fill the water tank for 1/3 with water.
3
Add some mild washing-up liquid to the
water in the water tank.
4
Clean the inside of the water tank with a
soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the filter
support back into the water tank.
EN
8
Clean the humidification filter
Clean the humidification filter every week to
keep it hygienic.
1
Take out the humidification filter and the
filter support from the water tank (fig. l).
2
Remove the humidification filter from the
filter support (fig. m).
3
Soak the humidification filter in tap water
for one hour (fig. n).
4
Rinse the humidification filter under a
slowly running tap. Do not squeeze or
wring the filter when cleaning (fig. o).
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter round
the filter support (fig. p).
7
Put the humidification filter and the filter
support back into the water tank (fig. q).
8
Put the upper unit back onto the water
tank (fig. d).
Note
•
Do not squeeze or wring the filter. This might
damage the filter and impact humidification
performance.
•
Do not dry the filter under direct sunlight, unless
it is assembled back onto the filter support