Clean Your Humidifier; Clean The Body Of The Humidifier; Clean The Water Tank; Clean The Humidification Filter - Philips HU4803/01 User Manual

5 Clean your
humidifier
Note
•
Always unplug the humidifier before you
clean it.
•
When pouring water from the water
tank, make sure to pour water from the
opposite side of the drain hole and air
inlets.
•
Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the humidifier.
Clean the body of the
humidifier
Regularly clean the inside and outside
of the humidifier to prevent dust from
collecting.
1
Wipe away dust with a soft dry cloth
from the body of the humidifier.
2
Clean the air inlet and the air outlet
with a soft dry cloth.

Clean the water tank

Clean the water tank every week to keep
it hygienic.
1
Take out the humidification filter and
the filter support.
2
Fill the water tank for 1/3 with water.
3
Add some mild washing-up liquid to
the water in the water tank.
4
Clean the inside of the water tank
with a soft clean cloth.
5
Empty the water tank into a sink.
6
Put the humidification filter and the
filter support back into the water
tank.
Clean the humidification
filter
Clean the humidification filter every
week to keep it hygienic.
1
Take out the humidification filter
and the filter support from the water
tank (fig. l).
2
Remove the humidification filter
from the filter support (fig. m).
3
Soak the humidification filter in tap
water for one hour (fig. n).
4
Rinse the humidification filter
under a slowly running tap. Do not
squeeze or wring the filter when
cleaning (fig. o).
5
Let excess water drip off the
humidification filter.
6
Assemble the humidification filter
round the filter support (fig. p).
7
Put the humidification filter and the
filter support back into the water
tank (fig. q).
8
Put the upper unit back onto the
water tank (fig. d).
Note
•
Do not squeeze or wring the filter. This
might damage the filter and impact
humidification performance.
•
Do not dry the filter under direct
sunlight, unless it is assembled back
onto the filter support
EN 9