Grip Warmer Adjusting Knob - Yamaha FJR1300ASX Owner's Manual

G
Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
G Always have a Yamaha dealer
service the shock absorber.
INSTRUMENT AND CONTROL FUNCTIONS

Grip warmer adjusting knob

This vehicle is equipped with grip
warmers, which can only be used when
the engine is running.
Use the grip warmer adjusting knob, lo-
cated near the accessory box, to adjust
the grip warmer temperature.
1. "LO" position
2. "OFF" position
3. " " mark
4. Grip warmer adjusting knob
5. "HI" position
The grip warmer adjusting knob can be
set between the "LO" and "HI" posi-
tions. To raise the temperature, turn the
knob in direction (a). To lower the tem-
perature, turn the knob in direction (b).
Align the " " mark on the knob with
"OFF" to turn the grip warmers off.
3-29
EAU40501
NOTE:
When the vehicle is stopped or travel-
ing at extremely low speeds (e.g., in
traffic jams), the grip warmer tempera-
ture is lower than when traveling at
higher speeds.
CAUTION:
G
Be sure to wear gloves when us-
ing the grip warmers.
G
If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer adjusting knob
to the "HI" position.
G
If the handlebar grip or throttle
grip becomes worn or damaged,
stop using the grip warmers and
replace the grips.
WARNING
Do not turn the grip warmer knob
while the vehicle is moving.
ECA15520
3
EWA14510