Grip Warmer Adjusting Knob - Yamaha FJR1300AS Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting knob fully turned
in direction (a)
3
TIP
To obtain a precise adjustment, it is ad-
visable to check the actual total number
of clicks or turns of the damping force
adjusting mechanism. This adjustment
range may not exactly match the spec-
ifications listed due to small differences
in production.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
G
Do not tamper with or attempt to
open the cylinder assembly.
G
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
G
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
EWA10221

Grip warmer adjusting knob

Do not turn the grip warmer knob
while the vehicle is moving.
NOTICE
This vehicle is equipped with grip
warmers, which can only be used when
the engine is running.
Use the grip warmer adjusting knob, lo-
cated near the accessory box, to adjust
the grip warmer temperature.
3-32
WARNING
G Be sure to wear gloves when us-
ing the grip warmers.
G If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer adjusting knob
to the "HI" position.
G
If the handlebar grip or throttle
grip becomes worn or damaged,
stop using the grip warmers and
replace the grips.
EAU40502
EWA14510
ECA15520