Yamaha FJR1300APX Owner's Manual page 35

1. Seat height position adjuster
3. Move the seat holder cover to the
lower position as shown.
1. Seat holder cover
4. Install the seat height position ad-
juster so that the "H" mark is
aligned with the match mark.
INSTRUMENT AND CONTROL FUNCTIONS
1. Seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
the seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
3. Seat holder cover
3-19
6. Align the projection on the bottom
of the seat with the "H" position
slot, and then push the rear of the
seat down to lock it in place as
shown.
1. "H" position slot
To change the seat height to the low
position
1. Remove the seat. (See page
3-18.)
2. Remove the seat height position
adjuster by pulling it upward.
3. Move the seat holder cover to the
upper position.
4. Install the seat height position ad-
juster so that the "L" mark is
aligned with the match mark.
3