Yamaha FJR1300APX Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
G
When the display is set to "L/100
km", the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
NOTE:
G
To switch between the two instan-
taneous fuel consumption dis-
plays, push the "RESET" button for
3
1 second when either display is
shown.
G If traveling at speeds under 10
km/h, "_ _._" will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AV_ _._ km/L" or
"AV_ _._ L/100 km".
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then, depending
on the unit set, "AV_ _._ km/L" (aver-
age distance that can be traveled using
1.0 L of fuel) or "AV_ _._ L/100 km" (av-
erage amount of fuel necessary to trav-
el 100 km) is displayed.
To reset the average fuel consumption
display, push the "RESET" button to se-
lect the mode again, and then push the
"RESET" button for 1 second while the
display is flashing.
NOTE:
G To switch between the two aver-
age fuel consumption displays,
push the "RESET" button for 1
second when either display is
shown.
G After resetting an average fuel
consumption display, "_ _._" will
be shown for that display until the
vehicle has traveled 1 km.
3-10
CAUTION:
If there is a malfunction, "– –.–" will
be displayed. Have a Yamaha dealer
check the vehicle.
Self-diagnosis device
1. Error code display
2. Immobilizer system indicator light
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the multi-function display
will indicate a two-digit error code.
ECA15472