INSTRUMENT AND CONTROL FUNCTIONS
Seat
To remove the seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
3
1. Seat lock
2. Unlock.
2. Lift the rear of the seat and pull it
off.
To install the seat
1. Insert the projection on the front of
the seat into the seat holder as
shown, and then push the rear of
the seat down to lock it in place.
EAU45710
1. Projection
2. Seat holder
2. Remove the key.
NOTE:
G
Make sure that the seat is properly
secured before riding.
G
The seat height can be adjusted to
change the riding position. (See
page 3-18.)
3-18
Adjusting the seat height
The seat height can be adjusted to one
of two positions to suit the rider's pref-
erence.
The seat height was adjusted to the
lower position at delivery.
1. Low position
2. High position
To change the seat height to the
high position
1. Remove the seat. (See page
3-18.)
2. Remove the seat height position
adjuster by pulling it upward.
EAU40970