Panasonic KX-TDA150 Installation Manual page 61

•
The SD Memory Card must be inserted in the SD Memory Card slot of the DMPR card before startup.
Note
•
For details about connecting peripherals, refer to "2.9.1 Connection of Peripherals".
•
For details about System Initialise Switch, refer to "2.11.1 Starting the PBX".
•
For details about Reset Button, refer to "4.1.4 Using the Reset Button".
•
When connecting the RJ11 or RJ45 connector, attach the included ferrite core. Refer to
"2.2.8 Attaching a Ferrite Core".
•
Portions of this product contains software of Datalight, Inc. Copyright 1993–2000 Datalight,Inc., All
Rights Reserved.
Pin Assignments
RJ11 Connector
4
1
RJ45 Connector
1
8
LED Indications
Indication
BATT ALARM
SD ACCESS
No. Signal Name
1 D2A
2 D2B
3 D1B
4 D1A
No. Signal Name
1 MOH1
2 MOH1
3 PAG2
4 PAG1
5 PAG1
6 PAG2
7 MOH2
8 MOH2
Colour Description
Red Battery alarm indication
•
OFF: Normal
ON: Alarm
Green SD memory card status
•
ON: Accessing
Function
Data port 1 (Low)
Data port 2 (Low)
Data port 2 (High)
Data port 1 (High)
Level [V] Function
Nonpolar Music on Hold Jack: Port 1
Nonpolar Music on Hold Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 1
Nonpolar External Paging Jack: Port 2
Nonpolar Music on Hold Jack: Port 2
Nonpolar Music on Hold Jack: Port 2
2.3.1 DMPR Card
Installation Manual 61