Panasonic KX-TDA150 Installation Manual page 56

2.2.10 Wall Mounting
1.
Install 3 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 3 screws
(A).
Metal Bracket
Screw (A)
Note
The pull-out strength of the installation area must be at least 294 N (30 kgf) per screw.
2.
Hook the shelf onto the metal bracket, making sure that the shelf slides down and onto the hooked parts
of the metal bracket. Use 2 screws (B) to fix both sides of the shelf. (Recommended torque: 0.8 N·m [8.2
kgf·cm] to 1.0 N·m [10.2 kgf·cm])
56 Installation Manual
Anchor Plug
W a ll
TOP
Hammer
Anchor Plug
30 mm
Screw (A)
Metal Bracket
Screw (B)
8 mm