Advertisement
www.aeroplusrc.com
Using supplied bolts attach the pushrod at both ends. Check to see you have
sufficient movement of the aileron. If not adjust.
Carry out the same procedure on the other wing.
Gas Engine
Measure the length of the engine (from the firewall to the prop thrust washer) , the
cowl and the engine box for the proper distance allowing 1/4"to 1/2" from the edge
of the cowl .Then mark the location
Remove if necessary
www.modellmarkt24.ch
www.modellmarkt24.ch
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Advertisement
