Restoring Default Settings In The Setup Utility - HP Pavilion ZE2000 Hardware And Software Manual

Software Updates and Recoveries and System Software
Restoring Default Settings in the
Setup Utility
The following procedure explains how to restore the Setup utility
default settings. If the notebook is not in the Setup utility, begin at
step 1. If the notebook is in the Setup utility, begin at step 2.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
to enter setup" is displayed in the lower-left corner of the
screen.
2. Select Exit > Load Setup Defaults, and then press
3. When the Setup Confirmation is displayed, press
your preferences.
4. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
The Setup utility default settings are set when you exit the Setup
utility and are in effect when the notebook restarts. Identification
information, including ROM version information, is retained.
8–12
while the prompt "Press <F10>
f10
Hardware and Software Guide
.
f10
to save
enter
,
f10