Editing A Stored Name And/Or Phone Number - Sanyo CLT-9950 Instruction Manual

All manuals and user guides at all-guides.com
CLT9950 2nd 6/28/00 8:42 PM
DIRECTORY

Editing a stored name and/or phone number

#/
REDIAL/PAUSE
TONE/ / *
0
4
Press the or
Edit Memory
, then press SELECT.
The following screen appears.
The cursor flashes indicating that the name can
be edited. When a name has not been stored, the
cursor appears at the beginning of the second line.
5
Press ,
,
to edit the name. (See page E17.)
To edit only the phone number, skip this step.
6
Press SELECT.
The following screen appears.
The cursor flashes indicating that the display is
ready for the number to be edited.
Page 25
1
Press and hold MEMORY for about 3 seconds until
the display shows the memory screen and any
stored name/number. A beep sounds.
Memory Store
01 SANYO
02 Alison McNab
2
Press and
(01–20) to select the memory location you would
like to edit.
Memory Store
1 01 SANYO
DELETE 02 Alison McNab
3
Press SELECT.
The following screen appears with the memory
location number that you have selected in the
display.
Edit Memory02
Delete Memory02
Go Back
to select
or DELETE
,
, or enter a two-digit number
Store Name
Alison McNab
Store Number
5452930
E21