Desktop Use - Sanyo CLT-9950 Instruction Manual

All manuals and user guides at all-guides.com
CLT9950 2nd 6/19/00 4:10 PM
GETTING

Desktop use

Connect the base unit
If you want to install the base unit
on the wall, see page E7.
2
To AC outlet
3
To telephone outlet
Note:
When connecting the power cord, make sure it does not create a trip or
fire/electrical hazard. Avoid places where it could become chafed.
1
Snap the bottom bracket into the notches on the base.
2
Connect the AC adaptor to the DC IN 9V jack and to a standard 120-V AC wall outlet.
Then raise the antenna to a vertical position.
3
Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
Note:
To assure proper handset charging, the bottom bracket must be attached.
Page 9
STARTED
1
To DC IN 9V
AC adaptor
(supplied)
To TEL LINE
Telephone line cord
(supplied)
E5