Storing Phone Numbers And Names - Sanyo CLT-2425 Instruction Manual

All manuals and user guides at all-guides.com
CLT2425 ENG-6/13 6/13/01
DIRECTORY

Storing phone numbers and names

The directory allows you to store up to 20 phone numbers/names in its memory. You can
dial a number in the directory using just a few key strokes.
DELETE/SCAN
REDIAL/PAUSE
TONE/ / *
0
Note:
In memory dialing operation,
you must press a key within
20 seconds, or the phone will
return to standby. If you return
the handset to the base, it will
return to standby, too.
4
Use or
,
The name cannot exceed 13 characters.
• Use or
case letters and various characters.
• Use and
• Press briefly DELETE/SCAN to delete a character.
• Press and hold DELETE/SCAN to delete all numbers and characters at once.
13:58 Page 17
1
Press and hold MEMORY for about 3 seconds
Memory Store
until
A beep sounds.
Memory Store
01
02
2
Use or
(01–20) to select the memory location where you
would like to store the number.
3
Press SELECT.
#/ The following screen appears and a cursor flashes
1
indicating that you can now enter the name.
Store Name
If the following screen appears, the selected location
is already occupied. Then you can either change the
entry in this location, clear the location, or select
Go Back
to choose another location.
Edit Memory07
Delete Memory07
Go Back
or DELETE/SCAN to enter the name.
,
to scroll through the character menu. It contains upper and lower
to move the cursor to the desired location.
is displayed.
, or enter a two-digit number
E17