Troubleshooting - Apelson CHIM60BKPF Manual

Troubleshooting

Fault
Excessive
vibration.
Light on, but
motor does not
work.
Both light and
motor do not
work.
Suction
performance
reduced.
Works normally
but cooking
smells linger.
If the lamp is failed please contact the after-sales care.
Cause
The appliance is not
installed properly on the
brackets.
The fan blade is
damaged.
The fan motor is not fixed
tightly.
The fan blade is jammed.
The motor is damaged.
Light bulb blown.
Power connection loose.
Speed may be too low.
Distance between the
cooker hood and the hob
is too great.
Aluminium grease filter is
dirty.
Top vent might be
obstructed.
Optional vent kit might be
twisted.
Charcoal filter not fitted
in recirculation mode or
charcoal filter is full of
grease.
Troubleshooting
Solution
Take down the appliance and
check it is properly fixed.
Switch off the appliance. Repair
to be carried out by qualified
service personnel only.
Replace with a bulb with correct
rating.
Check power supply.
Select a higher speed.
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
Clean filters. See Care and
maintenance section.
Clear any obstruction.
Ensure that the vent kit is fitted to
the manufacturers instructions.
Fit charcoal filter if recirculating or
change the filter. See Care and
maintenance section.
GB IE
13