Tv Tuner Module Cable - HP Pavilion DV6-1122 Maintenance And Service Manual

TV tuner module cable

NOTE: The TV tuner module cable is available in the Cable Kit, spare part number 533466-001.
Before removing the TV tuner module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
f. USB board (see
g. System board (see
Remove the TV tuner module cable:
1. Remove the TV tuner antenna connector from the clips (1) built into the base enclosure.
2. Remove the TV tuner module cable (2) from the clips and routing channel (3) built into the base
enclosure.
Reverse this procedure to install the TV tuner module cable.
90 Chapter 4 Removal and replacement procedures
Battery on page 48).
Hard drive on page 57).
Optical drive on page
Switch cover and keyboard on page
Display assembly on page
Top cover on page 80).
USB board on page 85).
System board on page
51).
68).
88).
63).