9.
Disconnect the display logo cable (3) from the display panel cable.
10.
If it is necessary to replace the display inverter, remove the four Phillips PM2.5×5.0 screws (1) that
secure the display inverter cover to the display bezel.
11.
Remove the display inverter cover (2) by lifting it straight up.
NOTE:
12.
Remove the display enclosure. The display enclosure table below identifies the correct part to use
for each computer model.
Description
BrightView display enclosure, Onyx (includes wireless antenna transceivers and cables
and logo LED board and cable) 16-inch
BrightView display enclosure, Moonlight White (includes wireless antenna transceivers
and cables and logo LED board and cable) 15.6-inch
84
Chapter 4 Removal and replacement procedures
You must remove the display inverter cover to free the antenna cables.
Spare part number
512824-001
517860-001