c.
Switch cover and keyboard (see
d.
Display assembly (see
e.
Top cover (see
f.
USB board (see
g.
System board (see
h.
Fan/heat sink assembly (see
1.
Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
108 Chapter 4 Removal and replacement procedures
Display assembly on page
Top cover on page
USB board on page
System board on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed
Switch cover and keyboard on page
81).
91).
98).
101).
Fan/heat sink assembly on page
76).
105).