Audio/Infrared Board - HP Pavilion DV6-1030 Maintenance And Service Manual

Audio/infrared board

Description
Audio/infrared board for use with computer models equipped with discrete graphics memory
(includes cable)
Audio/infrared board for use with computer models equipped with UMA graphics memory (includes
cable)
Before removing the audio/infrared board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
Remove the audio/infrared board:
1. Disconnect the audio/infrared board cable (1) from the LIF connector on the system board.
2. Remove one Phillips PM2.5x3.0 screw (2).
3. Release the clip (3) built into the base enclosure that secures the audio/infrared board.
Battery on page 59).
Hard drive on page 69).
Optical drive on page
Switch cover and keyboard on page
Display assembly on page
Top cover on page 91).
62).
81).
Component replacement procedures
Spare part number
512836-001
511892-001
76).
97