6.
If it is necessary to replace the hard drive cable, disconnect the cable from the hard drive. The
hard drive cable is included in the Cable Kit, spare part number 607975-001.
7.
If it is necessary to replace the hard drive isolator, remove the isolator from the hard drive.
NOTE:
The hard drive isolator is included in the Hard Drive Hardware Kits, spare part numbers
617523-001 (for use only with 1-TB and 750-GB hard drives) and 607974-001 (for use only with
640-, 500-, 320-, and 250-GB hard drives).
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures
61