9.
If it is necessary to replace the display hinges:
a.
Remove the six Phillips PM2.0×3.0 screws (1) secure the hinges to the display panel.
b.
Remove the hinges (2). The hinges are included in the Display Hinge Kit, spare part number
606878-001.
10.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Release the tabs (1) built into the display enclosure shielding that secure the WLAN antenna
cables to the display enclosure.
b.
Release the WLAN antenna cables (2).
92
Chapter 4 Removal and replacement procedures