Select
Fan Always On
Boot Options
Diagnostics menu
Select
Hard Disk Self Test
Secondary Hard Disk Self Test (select models only)
Memory Test
98
Chapter 5 Setup Utility
To do this
Enable/disable Fan Always On. When enabled, the computer
fan will always be on.
Set the following boot options:
●
f10
and
f12
Delay (seconds)―Set the delay for the
and
f12
functions of Setup Utility in intervals of 5
seconds each (0, 5, 10, 15, 20).
●
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from diskette.
●
Internal Network Adapter boot―Enable/disable boot
from Internal Network Adapter.
●
Boot Order―Set the boot order for:
◦
Hard drive
◦
Internal CD/DVD ROM drive
◦
USB Disk on Key/USB hard disk
◦
USB CD/DVD ROM drive
◦
USB floppy
◦
Network adapter
To do this
Run a comprehensive self-test on the hard drive.
Run a comprehensive self-test on a secondary hard.
NOTE:
On models with two hard drives, this menu option is
called Primary Hard Disk Self Test.
Run a diagnostic test on the system memory.
f10