Related Manuals for Roland PD-140DS
Summary of Contents for Roland PD-140DS
- Page 1 Owner’s Manual Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 6). After reading, keep the document(s) where it will be available for immediate reference. Copyright © 2016 ROLAND CORPORATION...
-
Page 2: Connecting To The Drum Sound Module
Mounting the PD-140DS on a Snare Stand On the drum sound module, make settings for using the PD-140DS. The PD-140DS can only be used with a commercially available snare * For details, refer to the owner’s manual of your drum sound stand. - Page 3 For replacement heads or to have the hoop rubber replaced, please The pad will function at it’s best if you are sure to: contact your dealer or a Roland service center. 5 Adjust the head evenly so that it does not sag.
-
Page 4: When Installing The Shell Covering
When Installing the Shell Covering By using a covering, you can customize the shell design to your taste. Please follow the instructions below. * You will also need to have a Phillips screwdriver. NOTE Covering size 5 Applying excessive force to the sensors located under the If you wish to install an original covering, you can use a covering of head can damage them and/or interfere with accurate the following size. -
Page 5: Playing Methods
4.9 kg Weight 10 lbs 13 oz Owner’s manual Accessories Connection cable Drum key * This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website. -
Page 6: Using The Unit Safely
Damage or This way you will avoid causing shorts, or • Roland and V-Drums are either registered malfunction may result if you attempt to use damage to the cable’s internal elements.
Need help?
Do you have a question about the PD-140DS and is the answer not in the manual?
Questions and answers