Expresscard Assembly - HP Pavilion DV2500 Maintenance And Service Manual

4.
Remove the modem connector (2) from the connector frame.
Reverse this procedure to install the power connector cable and modem cable.

ExpressCard assembly

Description
ExpressCard assembly
Before removing the ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
System board (see
Battery on page 40).
Hard drive on page 45)
Optical drive on page
Keyboard on page 54)
Switch cover on page
Display assembly on page
Top cover on page 65)
System board on page
53)
56)
59)
82)
Component replacement procedures
Spare part number
417112-001
85