Display Switch Module - HP Pavilion DV2500 Maintenance And Service Manual

Display switch module

NOTE: The display switch module is included in the Display Hinge Kit, spare part number 430473-001.
Before removing the display switch module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Wireless module compartment cover (see
c.
Optical drive (see
d.
Keyboard (see
e.
Switch cover (see
f.
Display assembly (see
g.
Top cover (see
Remove the display switch module:
1.
Turn the computer upside down with the front toward you.
2.
Remove the two silver Phillips PM2.5×5.0 screws that secure the top cover trim to the computer.
3.
Turn the computer right-side up with the front toward you.
Chapter 4 Removal and replacement procedures
80
Battery on page 40).
Hard drive on page 45)
Optical drive on page
Keyboard on page 54)
Switch cover on page
Display assembly on page
Top cover on page 65)
WLAN module on page
53)
56)
59)
48)