HP Pavilion DM3-1030 Maintenance And Service Manual page 59

Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can
result in damage to the display assembly and other computer components.
7. Release the hinges by removing the six Phillips PM2.5x5.0 screws 1 that secure it to the base enclosure. First
remove the left hinge and then the right.
✎
On the left side, one of the screws secures a display support strap. On the right side, the left-most screw secures a
ground strap for the wireless cables.
After removing all six screws, note that the power cable on the left hinge may interfere with the removal of the
display. Simply move the panel around the cable and then lift. On the right side, there is a metal plate that you
must workaround to remove the display.
8. If it is necessary to replace the display bezel or any of the display assembly internal components:
a. Remove the two rubber screw covers 1 and the two Phillips 2.0×5.0 screws 2 that secure the display bezel
to the display assembly.
Maintenance and Service Guide
Removal and replacement procedures
4–23