Replacing Small Parts And Accessories; Table 10. Replacing Small Parts - HP OmniBook XT1500 Series Troubleshooting And Self-Repair Manual

Replacing Small Parts and Accessories

The following small parts are user-replaceable.
Part Part Numbers
Cover, mini-PCI Included in door kit
F3377-60933
Cover, expansion
Included in door kit
SDRAM
F3377-60933
Covers, screw (on Included in
display bezel) feet/cover kit
F3377-60967
Feet, rubber Included in
feet/cover kit
F3377-60967
Cover, mini-PCI
Included in door kit
F3377-60933
Cover, expansion
Included in door kit
F3377-60933
SDRAM
Covers, screw (on
Included in
display bezel)
feet/cover kit
F3377-60967
Feet, rubber Included in
feet/cover kit
F3377-60967
AC-Adapter-
Ultraslim Delta
F4600-60901
75W s/PFC
Cord, Pwr, Europe
#ABB (2w)
8120-6314
Cord, Pwr, UK &
Singapore #ARS
8120-6315
(2w)
Cord, Pwr, UK
#ABA (2w)
8120-6313
External Floppy
D9510-63002
Drive, USB
Label, OB xt1500 F3444-60911
Label, Pav zt1000
F3377-60983
Port Replicator
Assy
F3494-60902
zt1100/xz200 and xt1500 Series
Troubleshooting and Self-Repair Guide

Table 10. Replacing Small Parts

Replacement Procedure
On the bottom of the notebook, loosen the screw in the mini-PCI
cover (the cover retains the screw) and remove the cover.
On the bottom of the notebook, loosen the screw in the SDRAM
module cover (the cover retains the screw) and remove the cover.
Insert a small flat-blade screwdriver under the cover and pry it loose.
To replace, firmly press the adhesive side of the cover into the
recess.
Insert a small flat-blade screwdriver under the foot and pry it loose.
To replace, firmly press the adhesive side of the foot into the recess.
On the bottom of the notebook, loosen the screw in the mini-PCI
cover (the cover retains the screw) and remove the cover.
On the bottom of the notebook, loosen the screw in the SDRAM
module cover (the cover retains the screw) and remove the cover.
Insert a small flat-blade screwdriver under the cover and pry it loose.
To replace, firmly press the adhesive side of the cover into the
recess.
Insert a small flat-blade screwdriver under the foot and pry it loose.
To replace, firmly press the adhesive side of the foot into the recess.
Removing and Replacing Parts 55