Figure 16. Disconnecting The Keyboard - HP OmniBook XT1500 Series Troubleshooting And Self-Repair Manual

4. Raise the top of the keyboard, then lift the keyboard up and out of the notebook.
5. Lay the keyboard face down on the top case, forward of its normal position, and disconnect the
ribbon cable from the motherboard.
Warning
Do not touch the metal surfaces inside the notebook until they have cooled off. They could
be very hot if the notebook was running recently.
Reassembly Notes
•
Lay the keyboard face down on the top case, forward of its normal position, and reconnect the
ribbon cable.
•
Slip the metal tabs on the bottom of the keyboard into their slots in the top case, then lower the
keyboard into place.
zt1100/xz200 and xt1500 Series
Troubleshooting and Self-Repair Guide

Figure 16. Disconnecting the Keyboard

Removing and Replacing Parts 49