HP OmniBook XE3 Notes page 4

TV set after resume
If you are using a TV set as the monitor for your computer and it does not work properly after
standby and resume, check to see that the BIOS setting for Video Display Device is Auto (which
is the default setting):
1. Shut down Windows and restart the computer (Click Start, Shut Down, Restart).
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. In the Main Menu, select Video Display Device and set it to Auto.
4. After you have finished making changes, press F10.
Press Enter, then Enter again, to confirm and reboot the computer.
Running the Tour of Windows 2000
In the Getting Started window, you can click Discover Windows for a tour of Windows 2000.
When you're prompted to insert the CD, click Cancel and type c:\tour to start the tour.