To Remove Ram Modules - HP OmniBook XE Setup Manual
Hp omnibook xe: supplementary guide
Hide thumbs
Also See for OmniBook XE:
- Setup manual (74 pages) ,
- User manual (49 pages) ,
- Reference manual (7 pages)
Table of Contents
Advertisement
Using the OmniBook
Expanding the OmniBook
5. Replace the RAM expansion module door.
6. Insert the battery.
To remove RAM modules
After you remove the RAM expansion cover, do the following:
1. Release the two latches at the sides of the RAM expansion module by pushing
them gently outward (away from the sides of the module).
2. When you release the latches, the free edge of the module pops up.
3. Pull the module out of the connector.
4. Replace the RAM expansion module door.
30
Setup Guide
Advertisement
Table of Contents
