Alpine HALO9 iLX-F309 Owner's Manual page 114

Removing Radio Panel Components (Continued)
7
Extract (6) small Phillips screws from the factory
radio panel.
Installation Instructions
1
Install the Hazard light switch, top and side vent
trims using the factory screws into the iLX-F309FRN
radio panel.
3
Attach the microphone to the headliner next to the
eyewear compartment with the provided Phillips
screw.
iLX-F309FRN
8
Remove the top and vent trims. Note: be sure to
retain all screws as they will be used on the new
radio panel.
2
Snap both left and right vents into place.
4
Connect the OBD2 adapter to the OBD2 port below
the driver's side dash. .
Toyota 4Runner
˜ 8/20