Factory Unit Disassembly Process
1
Use a panel removal tool to release the clips on
both right and left panels of the HVAC control panel.
3
Use a pair of needle nose pliers to close and release
the tabs on the wire harness anchor. Disconnect the
harness and remove the HVAC.
5
Use a panel removal tool to release the clips and
remove the factory radio.
iLX-F309FRN
2
Use a panel removal tool to release the HVAC
control panel.
4
Use a 10mm socket to extract the (4) screws below
the factory radio.
6
Use a panel removal tool to remove the "SRS
Curtain Airbag" screw cover.
Toyota 4Runner
5/20