Alpine HALO9 iLX-F309 Owner's Manual page 115

Installation Instructions (Continued)
5
Route the microphone cable down to the OBD2 port
and route both OBD2 cable and microphone to the
radio cavity as shown below.
7
Connect the main harness and additional
connectors between the vehicle and radio
according to the corresponding wiring diagram on
pages 10 or 11.
9
Return all removed components to their factory
locations and connect the negative (-) battery
terminal.
iLX-F309FRN
6
Connect the GPS antenna, FM antenna, SAT Radio
antenna and USB adapters into the vehicle side.
8
Mount the iLX-F309FRN using the factory screws.
Note: Kit only requires (2) 10mm screws. Place the
additional (2) 10mm screws back into the factory
location in case they are needed in the future.
Toyota 4Runner
˜ 9/20