Frigidaire PCFD3668AF Installation Instructions Manual page 15

36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
Refitting the burners
In order to be installed correctly, the shape of the
burner skirt openings must match the shape of the
openings in the burner base.
The flame-spreader crown must be centered on the
burner skirt.
The burner cover must be leveled and centered with
respect to the burner skirt.
Each burner component must be positioned horizon-
tally and must correctly interlock with each other.
Check that they are fitted correctly by moving each
component gently. If the components do not fit cor-
rectly or are inclined, adjust the position of each
component until it remains fixed in position.
Wall and floor attachment
WARNING
CAUTION
WARNING
Positioning the bracket using the template:
1. Choose the correct side of the template, based
on the model.
15
Electrical shock hazard
• Use extreme caution when
drilling holes in the wall or
floor. There may be con-
cealed electrical wiring
behind the wall or under the
floor.
• Identify the location of the
electrical circuits that could be
affected by the installation of
the anti-tip device, then turn
off power to these circuits.
• Failure to follow these instruc-
tions may result in electrical
shock or other personal injury.
• Contact a qualified installer or
contractor to determine the
proper method for drilling
holes through the wall or floor
material (such as ceramic tile,
hardwood, etc.)
• Failure to follow these instruc-
tions may result in damage to
wall or floor coverings.
Visually check from the inside
of the drawer that the wall/floor-
mounted bracket is inserted
into the appropriate lateral hook
(left side).