Figure 6 - Display Removal - HP OmniBook 5000 Familiarization Manual

Figure 6 - Display Removal

To reinstall the display module or Icon Assembly, just reverse the above procedure. Caution: To
avoid crimping the Icon Assy Flex Cable, ensure that it is tucked inside of the Icon Assy
"tunnel." When reinstalling the Display Module, make sure that the two posts on either side of the
display line up parallel with their slots in the top case. If they are not parallel, the post will get caught
inside the top case before the display is seated completely. If this happens, remove the display and
line the posts up properly.
31