Notebook Hardware Structure Field Replaceable Assemblies; Installing Memory (End User Replaceable); Figure 1 - Memory Door And Slot - HP OmniBook 5000 Familiarization Manual

Notebook Hardware Structure
Field Replaceable Assemblies
Torque Specification: For M2.6 screws; 5.0 +/- 1 in-lb
Installing memory
(End User Replaceable)
Caution: To avoid damage from electrostatic discharge, be sure to ground yourself prior to
installation or removal of memory.
The OmniBook 5000 family has two memory locations for expanding system RAM. The memory
locations are under the cover on the back of the computer. Remove the cover by lifting at the finger
indent.. The factory installed RAM module is located in the back pair of sockets. To add an
additional 8MB, 16MB, or 32MB of RAM, use the front location. To expand beyond 40MB or 48MB of
memory, you must discard the factory installed card and replace it with either a 16MB or 32MB
memory module.

Figure 1 - Memory Door and Slot

25